DigiNX-WDS-2000i

How Can We Help?

The DigiNX-WDS-2000i Wireless Delivery System is a UHF data link for those demanding applications where reliable service is needed over many miles of land or water.

In the standard configuration, two digiNX radios provide full-duplex point-to-point service. The radios, which have a synchronous serial interface, can be purchased alone. Or, TelePoint can add VoIP, multiplexer, or bridge equipment to form a complete system. These systems can be configured to link any combination of voice lines, Ethernet, T1/E1, asynchronous serial, ISDN, and others. All equipment is typically configured by TelePoint so that the customer receives a turn-key system which supplies all the voice and/or data channels they require.

STANDARD FEATURES OF THE digiNX RADIO

  • Range up to 30 miles (50 kilometers).
  • Transmit power is settable up to 5 watts per radio.
  • RF frequencies from 400 to 512MHz or 790 to 960MHz may be chosen in 5 or 6.25kHz steps.
  • Choice of RF bandwidths: 50, 100, 200, 400, or 800kHz.
  • Choice of data rates: 32, 64, 128, 256, or 512kbps.
  • Data interface can be V.35, RS-530, RS-449/V.36, or RS-232.
  • Settings are easily made using the front-panel keypad and display menus.
  • Power input is 50 or 60Hz and is switchable between 115 and 230VAC.
  • Display can show TX power output or RX signal strength.
  • Front-panel LED’s indicate Power, TX, RX, and other functions.

ADDITIONAL PRODUCTS AVAILABLE TO FORM A COMPLETE digiNX SYSTEM

  • Range up to 30 miles (50 kilometers).
  • Transmit power is settable up to 5 watts per radio.
  • RF frequencies from 400 to 512MHz or 790 to 960MHz may be chosen in 5 or 6.25kHz steps.
  • Choice of RF bandwidths: 50, 100, 200, 400, or 800kHz.
  • Choice of data rates: 32, 64, 128, 256, or 512kbps.
  • Data interface can be V.35, RS-530, RS-449/V.36, or RS-232.
  • Settings are easily made using the front-panel keypad and display menus.
  • Power input is 50 or 60Hz and is switchable between 115 and 230VAC.
  • Display can show TX power output or RX signal strength.
  • Front-panel LED’s indicate Power, TX, RX, and other functions.

AVAILABLE OPTIONS

  • Redundancy/hot standby
  • TX control by RTS pin, enabling half-duplex and point-to-multipoint configurations.
  • Repeaters
  • Power input: Besides the standard 115/230VAC, others are available such as +12VDC, +/-24VDC, and +/-48VDC.

AVAILABLE ACCESSORIES

  • Antennas (any required gain)
  • Antenna cables with connectors (any required length)
  • Lightning and surge protectors for antenna, phone, and/or data lines
  • Uninterruptible (battery-backed) power supplies
  • Solar power